05905 / 94541-10
Kontakt
Epoxy resin topcoat system transparent | HP-E30TDS
Epoxy resin transparent top coat system | HP-E30TDS
The epoxy system HP-E30TDS is a thixotropically adjusted, solvent-free 2-component combination of resin and hardener with a processing time of 30 min. It is suitable for creating high-quality top coats.✔ top coat resin
...seals wood, metal, various plastics, screed and floor.
...very good adhesion properties and high abrasion resistance
...pronounced osmosis protection
...very high mechanical and chemical resistance
...suitable for high-quality surface coatings
(in boat building, pond and pool construction, roof coatings,
balcony waterproofing, agricultural and industrial coatings).
Hint:
Our transparent system HP-E30TDS is adjustable with the color pastes HP-FP according to RAL.
To increase the color stability we recommend the addition of our UV stabilizer HP-BEL91.
Can I also use the E30TDS for impregnating the fiber material?
Since it is very viscous, it is not particularly suitable for impregnating the fiber. In this case, one of our laminating resins should be used.
Is the E30TDS UV stable?
Unfortunately, epoxy resins do not have particularly good UV stability, so they can fade over time when exposed to strong sunlight. To protect them, a clear topcoat with BEL91 UV stabilizer can be applied. Alternatively, our PU topcoat HP-PUR-PLUS can be used for coating. This system has a particularly good UV stability and can be supplied according to RAL.
Is the E30TDS also available in other colors?
Yes, our epoxy top coat systems can be supplied in various colors or are available colorless plus various color pastes similar to RAL. Alternatively, our PU top coat HP-PUR-PLUS (delivery according to RAL possible) can be used for coating.
Is coating safe for my fish?
If our processing instructions are followed, the cured material does not release any substances into the water and is therefore not critical for humans or animals.
Is chlorine pollution or the addition of salt problematic?
If the dosage instructions for the chemicals used for swimming pool hygiene are observed, there is no problem. Should overdosing occur, it can lead to impairments and changes in the surface or color.
Technical data | HP-E30TDS
✔ processing time: 30 min
✔ colour: transparent
✔ mixing ratio (weight): 100 parts resin / 53 parts hardener
✔ mixing viscosity: thixotropic
✔ processing temperature (optimum): 20-25°C
Resin component:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener component:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener component:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.