05905 / 9454110
Kontakt
4 kg Coating System RAL7032 - Epoxy Resin | HP-E30RB
NEW
4 kg Roller Coating RAL 7032 for Floor & Wall | E30RB
The E30RB epoxy resin system is a 2K epoxy roller coating with a medium pot life for high-quality floor and wall coatings similar to RAL7032 pebble grey.
Properties:
- Brushable / rollable coating compound for floor and wall coatings
- Very good adhesion properties, high abrasion resistance (when used in a system build-up with the E35GS epoxy primer)
- Can be equipped with anti-slip properties if required
- Very high chemical and mechanical resistance
- High-quality surface that is easy to clean
- Solvent-free, can be diluted if required with the thinner HP-XB (maximum 5%)
- Colour: similar to RAL7032 pebble grey
Areas of Application:
- For indoor and outdoor use on floors and walls
- Suitable for cement-based or wood-based substrates
- Workshops, garages, feeding tables in livestock farming, slaughterhouses, milking parlours, utility floors in animal husbandry, warehouses and much more
Application:
- Consumption: approx. 400 - 600 g/m², depending on the substrate condition
- E30RB can be applied using a paint roller or brush
Application Notes
1. Substrate Preparation:
The E30RB roller coating can be applied to new and slightly porous substrates. These must be dust-free, rough, sound, clean and dry. Mechanically smoothed or sealed floors should be sanded or sandblasted before coating. Breakouts, damaged areas and imperfections in the substrate should be filled flush with the surface using suitable cement mortars or our epoxy filler HP-E30S (prime breakouts and defective areas beforehand with E35GS epoxy resin). Afterwards, our E35GS primer should be applied over the entire surface. The primer acts as an epoxy resin moisture barrier and at the same time as an adhesion promoter between the mineral substrate and the subsequent coating. For optimum penetration into the pores, approx. 10% XB thinner should be added to the E35GS primer system.2. Application of the coloured roller coating E30RB:
After component B has been added to component A and both components have been mixed thoroughly and intensively, the epoxy resin can be applied to the surface to be coated using a roller or brush. At warmer temperatures, it is recommended to pour the entire bucket onto the surface and spread it with a roller in order to ensure user-friendly working time. We recommend applying E30RB in two coats. On wall surfaces, it is ideal to apply several thin coats. If the floor coating is to be made slip-resistant, it is recommended to scatter fire-dried quartz sand between the first and second coat. Optionally, 0 - 5 parts of thinner (HP-XB) can also be stirred into the mixed system to improve brushability.3. Recommended tools for processing:
Extension pole (HP-L1024), polyamide roller 25 cm (HP-L1026), polyamide roller 15 cm (HP-L1017), plastic bucket 14 ltr. (HP-L1050), drill, mixing paddle attachment for drill.Technical Data | HP-E30RB
✔ Pot life: 30 min✔ Mixing ratio (by weight): 100 parts resin / 22 parts hardener
✔ Mixed viscosity: viscous
✔ Processing temperature (minimum): 15 °C
Hazard Statements
Resin:Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
