05905 / 9454110
Kontakt
4 kg Epoxy Priming Resin 35 min (low viscous) | HP-E35GS
4 kg Epoxy Priming Resin 35 min (low viscous) | HP-E35GS
The Epoxy System HP-E35GS is an unfilled, low-viscosity combination of resin and hardener with high adhesion to several surfaces.
Properties:
- Water barrier
- Deep impregnation
- Pore filling
- Solidifies underground
- High adhesion even on damp substrates
- Substrate preparation in system setup with E30RB or E30VB
Areas of Application:
- Mineral, wood-bounded and metallic substrates
- Residual moisture of substrate max. 6 - 8 %
Application:
- Consumption: approx. 150 - 250 g/m², depending on the substrate
- HP-E35GS can be applied using a paint roller or rubber squeegee
Use as a deep primer:
In combination with our epoxy thinner (XB), the primer system can be used as a deep primer. For this purpose, 5 - 10% thinner (depending on the substrate) must be added to the mixture.
Technical Data | HP-E35GS
✔ Pot life: 35 min✔ Mixing ratio (by weight): 100 parts resin / 60 parts hardener
✔ Mixed viscosity: Low viscous
✔ Processing temperature (minimum): 10 °C
Hazard Statements
Resin:Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
