Epoxy filler system | HP-E30S
Epoxy Filler System | HP-E30S
The epoxy system HP-E30S is a filled, paste-like 2-component combination of resin and hardener with fine fillers. This solvent-free epoxy filler can be used in many applications.✔ filler resin
...excellent adhesion to wood, steel, composites, etc.
...ideal for use on osmosis damage in the field of boat refurbishment
...suitable for applications below the waterline
...high water vapor density
...semi-flexible, so that vibrations are dampened
...high resistance to chemicals
Hint:
The system is dust dry after approx. 120 min.
Can I apply the E30S directly to the substrate?
If possible, it should be sanded and cleaned with acetone. In addition, the primer E80FS should be applied beforehand. See technical data sheet.
How long do I have to wait before I can continue laminating?
Depending on temperature, humidity and layer thickness, the next layer can be applied after approx. 2 hours.
Technical data | HP-E30S
✔ processing time: 30 min
✔ colour: light green/matt
✔ mixing ratio (weight): 100 parts resin / 50 parts hardener
✔ mixing viscosity: pasty
✔ processing temperature (minimum): 15°C
Resin component:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener component:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener component:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.