Main page » Application » Roof » premium PLUS set: glass fabric with PU top coat

premium PLUS set: glass fabric with PU top coat

Mobile Preview: roof coating HP-PUR-PLUS

premium PLUS set: glass fabric with PU top coat

Shipping time:
Stock:: Anzahl

Area in m²:

Color:

from 232,40 EUR

incl. 19% tax excl. Shipping costs

Anzahl:

Quantity

Add to wish list

Ask about product

Description

roof and floor coating with 2K PUR top coat
brilliant colours and high UV resistance

High-quality 2-component epoxy resin systems in combination with modern glass fabric reinforcement and a 2K PUR top coat for the highest demands and long-lasting UV protection.

This system is more durable and robust than any conventional films. The 2K PUR top coat is available in almost all RAL colours on request!

The perfect basis for waterproofing, wrinkle-free coatings or extensive green roofs!

From the primer to the laminating and top coat, this complete GRP set contains all products you need for the individual roof coating!
Further advantages of our glass reinforced plastic (GRP) coating, in addition to its high resistance to animal claws, stones and impact loads, are the following aspects:

✔ simple "do it yourself" system solution

... sets for 5 m² to 150 m² total area freely selectable
... choice of different colours
... offers for special or larger projects available on request!

✔ excellent substrate for green roofs

... no penetration of roots
... can also be installed without expensive profiles

✔ high water and chemical resistance

... when complying with the dosing regulations for the chemicals used for swimming pool hygiene
... effective protection against moisture damage

✔ pronounced osmosis protection

... also for applications on old substrates, concrete or GRP

The application only requires a little manual skill and the observance of a few basics in handling the materials. All relevant information and tips can be found in our detailed instructions and in our practical videos!

Hint:
We recommend using our tool sets that have already been composed - they contain the right tools for every roof size!
For white shades, 3 - 4 coats are required. The additionally required quantity must be ordered separately!

procedure for a GRP coating

1. priming with epoxy resin

Among other things, balsa is suitable as a substrate for priming with epoxy resin. Priming is done with the epoxy resin HP-E80FS, which you can apply with a suitable painter's roller. The consumption of the epoxy resin primer is 0.15 - 0.2 kg/m².

2. laminating with glass fabric and epoxy resin

As soon as the primer has dried, you can start with the core of the coating, the GRP laminate. It consists of 2 layers of glass fabric, which are applied 1/2 offset to the previously applied primer resin. The glass fabric is impregnated with the laminating resin HP-E30TLS, which is applied with an ink roller. The consumption is approx. 1.4kg/m². Optional: To achieve a particularly smooth surface, a C-glass fleece HP-VJ30C or HP-VJ50C can also be applied as the last layer. Here the consumption would increase by approx. 0.3 - 0.4kg/m².

3. coloured top coat with high-quality 2K polyurethane top coat

The coloured polyurethane top coat is applied as a final coat to the laminate that has not yet cured (the laminate should not be older than 24 h). For this final coat, you apply the 2-component top coat HP-PUR-PLUS with the appropriate brushes and rollers. To increase the covering power, we recommend a second coat of top coat as soon as the surface is ready to be walked on. The total consumption is approx. 0.15 - 0.2kg/m² (in 2 coats). The set includes enough topcoat.
Attention: For white shades, 3 - 4 coats are required. The additionally required quantity must be ordered separately!

4. tips for application

In order to save as much time as possible, you can also work wet in wet during the individual steps. This means that the individual coats should not cure completely before the next coat is applied, otherwise intermediate sanding including cleaning will be necessary. Rule of thumb: As soon as the layer can be walked on, work can continue (do not wait longer than 24 hours!).

video instruction for a GRP coating

Scope of delivery

Premium PLUS sets: roof coating with 2K PUR top coat

* For white shades, double the amount of HP-PP is needed, as more coats are required.

✔ set for 5 m²

✔ set for 10 m²

✔ set for 15 m²

✔ set for 20 m²

✔ set for 25 m²

✔ set for 30 m²

✔ set for 35 m²

✔ set for 40 m²

✔ set for 45 m²

✔ set for 50 m²

✔ set for 60 m²

✔ set for 70 m²

✔ set for 80 m²

✔ set for 90 m²

✔ set for 100 m²

✔ set for 110 m²

✔ set for 120 m²

✔ set for 130 m²

✔ set for 140 m²

✔ set for 150 m²

Working instructions

technical data sheets and working instructions

epoxy resin primer system HP-E80FS	[PDF]
epoxy resin laminating system HP-E30TLS	[PDF]
2K PUR top coat HP-PUR-PLUS	[PDF]
thinner HP-XB	[PDF]
glass fabric HP-B320/635E	[PDF]

step-by-step instructions	[PDF]
processing epoxy resins	[PDF]
processing HP-PUR-PLUS	[PDF]

"Tips for building"!

Hazard statements

HP-E80FS

Resin component:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Hardener component:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.

HP-E30TLS

Resin component:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Hardener component:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

HP-PUR-PLUS

Resin component:
Danger
H226 Flammable liquid and vapour.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H332 Harmful by inhalation.
H335 May cause respiratory irritation.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.

Hardener component:
Warning
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause allergic skin reaction.
H319 Causes severe eye irritation.
H331 Toxic by inhalation.
H332 Harmful by inhalation.
H334 May cause allergy, asthma-like symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life with long lasting effects.

HP-XB

Danger
Highly flammable liquid and vapour.
May be fatal if swallowed and enters airways.
Causes skin irritation. Repeated exposure may cause skin dryness or cracking
Causes serious eye irritation.
Harmful if inhaled.
May cause respiratory irritation.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure.
Achtung Entflammbar Ätzend Gesundheitsgefährdend

FAQ

frequently asked questions

What is GRP?

GRP is a glass reinforced plastic. In this case, a plastic made of a 2-component epoxy resin with glass fabric as reinforcement. We supply the corresponding individual components: liquid epoxy resin incl. hardener and matching glass fabric. The resin and hardener are mixed on site and the substrate is then coated with the glass fabric. The hardening to a solid plastic begins after a few hours.

Why GRP (glass reinforced plastic)?

GRP composites, made of epoxy resin and glass fabric, are particularly resistant to mechanical stress! (Glass fabric do not fuzz out like a glass mat, nor are they susceptible to shifting like a glass fabric). The result:
- more durable than any conventional liner and resistant to animal claws, stones and impact loads.
- wrinkle-free pool design and easy incorporation of connections such as skimmers, drains, nozzles, etc.
- problem-free "do it yourself" system solution. No welded seams and can be extended or redesigned at any time. Also coloured...

Why epoxy resins?

Epoxy resins have very good adhesion and load-bearing properties. They are free of solvents and can also be processed under sunlight. Cured epoxy resin laminates are characterised by a high water vapour density and are therefore the ideal material for areas with permanent water exposure.

Why HP-PUR-PLUS (polyurethane)?

A polyurethane coating can shows its advantages especially under difficult conditions. The surfaces of pools and bathing ponds are ideal for this. The HP-PUR-PLUS easily withstands high demands, such as mechanical stress caused by pressure or extreme stress caused by strong UV radiation. An epoxy / polyurethane coating not only helps to prevent the penetration of moisture into the building structure, but also makes it more difficult for biological substances to settle, which are a basis for vermin, fungal and mould infestation. The building fabric can be protected in the long term by using a HP-PUR-PLUS coating.

Can I also get different quantities?

Yes, no problem! Simply add individual components to the shopping basket and order. Alternatively: send a short enquiry by e-mail or use the contact form.

Do you also offer other colours than those mentioned in the sets?

Yes, our epoxy topcoat systems can be supplied in various colours or are available colourless plus a wide range of colour pastes. We can supply our HP-PUR-PLUS top coat in almost all RAL colours. You can find a list here.

Can I coat or laminate on Styrofoam / Styrodur?

As our epoxy resins do not contain any solvents, you can laminate on Styropor or Styrodur without any problems.

Which substrate is (in)suitable for a roofcoating?

The coating should be laminated on a mineral substrate (plastered screed mats, brickwork, concrete, etc.). Lost wooden formwork is also suitable. In any case, it is important to keep residual moisture as low as possible. (Pond) foil as a substrate is theoretically possible but not necessarily useful, as the ugly folds cannot be laminated out. It should never be coated directly on the ground!

What weather conditions are suitable for such a project?

Temperatures between 15-25 °C and a maximum humidity of 70 %, as well as sufficient air circulation are optimal. In general, epoxy resins are not sensitive to sunlight during application, as is the case with polyester resins, for example. If necessary, you should have a cover ready to protect the fresh laminate from rain, dust or similar. For larger and longer-lasting projects, it is generally advisable to construct a kind of tent roof.

Do I have to wait between steps when using epoxy systems?

Once the primer is ready to walk on, you can coat or laminate. When laminating the layers, you can work wet in wet to save time. For a 3-layer coating, start with the 1st layer and apply the subsequent layers staggered by 1/3. This way you achieve a 3-layer structure directly. Rule of thumb before applying the top coat is: As soon as the epoxy layer is walkable, you can continue working!

Can I apply this type of coating myself?

With a little manual skill, our work instructions and by observing the technical data sheets, it should be no problem! Far more than 1.000 projects in private areas proof this fact! Customer statement: "... wallpapering without having to work very precisely, in 2 or 3 layers ...".

How do I get a surface that is as smooth as possible?

When using glass fabric, a slight structure and the overlapped edges of the batts remain visible. To improve this appearance, an additional layer of C-glass fleece (HP-VJ30C / 30g/m² or HP-VJ50C / 50g/m²) can be laminated and cut to size (comparable to wallpapering). Finally, coat with epoxy resin and, if necessary, sand again after curing. Then apply an epoxy resin top coat or PU top coat.

When rolling the paint, small bubbles appear. How can those be avoided?

When using the recommended rollers (HP-L1032 and HP-L1034), bubbles do not usually form. This can happen when using commercially available rollers! With a suitable flat brush or paint brush, the bubbles can be spread directly after rolling the paint. This is known as blending. Work carefully, otherwise the result will be a very uneven surface.

The colour appears uneven or irregular when applied?

When mixing, it is important to stir the individual components well beforehand, and a good mixing of the whole system afterwards. After mixing, the mixture should be left to rest for approx. 10 minutes so that any bubbles can escape.

Does it make sense to apply as thickly as possible?

When applying the paint, make sure that the paint is rolled on evenly and not too thickly. If the layer is too thick, not all of the paint can react with the oxygen and thus not cure. This results in the formation of bubbles and an uneven colour appearance. Later on, it can even lead to chipping. Tip: It is better to apply two thin coats than one too thick! Please note that the first coat should be tack-free before applying the second coat. The second coat must be applied within 24 hours after the first coat has cured. ( at 20 °C )

I have used much less than specified. Can I return the paint?

All paints are mixed individually to customer order and therefore unfortunately cannot be returned. In addition, the specified quantity should be adhered to. Too thin an application will impair the quality and durability of the coating.

Can I get advice by phone during the procedure?

Yes, of course! Our team is also available at work hours and can advise you by phone.

Shipping information

✔ shipping by parcel service

... up to a total weight of approx. 50 kg
... delivery time is one to two days

✔ shipping by forwarding agent (on pallet)

... from a total weight of approx. 50 kg
... delivery time is two to four days
... arrangement of a delivery date by telephone

✔ express delivery

... delivery within 24h
... for particularly urgent deliveries
... please contact us for more information

✔ shipment tracking

... you will receive the link immediately after the goods have been dispatched.

✔ control on receipt of goods

... please check the order for condition and completeness
... have the goods been damaged during shipment? Then refuse to accept the goods or have the delivery person acknowledge the external damage.
... are there any other problems? Feel free to contact us at any time

This product is compatible with (for example):

tool set for coating with epoxi or PU top...

✔ coating with epoxi and PUR-PLUS
✔ basic equipment for your project
✔ coatings from 5 - 150 m² freely selectable
✔ brushes, rollers, gloves, cleaning agents, ...

from 44,90 EUR

Stirrer with metal propeller | HP-L1051

measures:	85 x 400 mm
colour:	red

3,34 EUR

2K PUR Topcoat PLUS | HP-PP-TEXTUR (slip-proof)...

✔ nearly all RAL colours
✔ textured non-slip surface
✔ good resistance to water and chemicals
✔ long-lasting colour stability
✔ good filling properties
✔ ready for rolling and brushing

from 33,50 EUR

2K PUR Topcoat PLUS | HP-PP

✔ almost all RAL colours
✔ glossy and weather-resistant coatings
✔ excellent fullness of the paint film
✔ high UV resistance
✔ application by rolling and brushing

from 33,50 EUR

Nitrile-Gloves "powdered"

✔ high resistance against chemicals
✔ more resistance then vinyl / latex
✔ good to wear and easy to handle with
✔ also suitable to use in medicine, laboratory, ...

from 3,24 EUR

premium PLUS set: glass fabric with PU top coat

roof and floor coating with 2K PUR top coat ** brilliant colours and high UV resistance **

procedure for a GRP coating

video instruction for a GRP coating

Premium PLUS sets: roof coating with 2K PUR top coat

technical data sheets and working instructions

Hazard statements

frequently asked questions

Shipping information

This product is compatible with (for example):

roof and floor coating with 2K PUR top coat
brilliant colours and high UV resistance